Cork
Light Weight Cork
Made from the bark of the Cork oak tree, light weight cork is ideal for use with elevations and lightweight scaphoid reinforcements.
| Durometer: 55 Shore A Sheet Size: 28" x 24" Composition: Natural Tree Cork Molding Temperature: Not Moldable Grindable: YES Available Colors: Natural |
Uses: Metatarsal relief, arch fill, elevations, and light weight scaphoid reinforcements.
| Item | Dimension | Iron | Case |
| SDUR-00079 | 1/8" | 6 | 24 |
| SDUR-00080 | 1/4" | 12 | 12 |
| SDUR-00081 | 1/2" | 24 | 6 |
| SDUR-00082 | 1" | 48 | 3 |
Elasti-Cork™
Acor's own Elasti-Cork™ is a synthetic cork and is used in base layers for foot orthotics and posting. This natural latex substrate is a bit more rigid than light weight cork, but has the added ability to be molded.
| Durometer: 60 Shore A Sheet Size: 36" x 44" Composition: Natural Tree Cork Molding Temperature: 275°F 3-5 min. Grindable: YES Available Colors: Natural |
Uses: Base layer in foot orthotics, sandals, heel postings and arch fill.
| Item | Dimension | Iron | Case |
| SDUR-00011 | 1/8" | 6 | 24 |
| SDUR-00012 | 3/16" | 9 | 16 |
| SDUR-00013 | 1/4" | 12 | 12 |
Multicork™
Multicork™ is an EVA substrate ideal for base layers in foot orthotics and posting.
| Durometer: 55 Shore A Sheet Size: 37" x 30" Composition: Natural Cork and EVA Molding Temperature: 275°F 3-5 min. Grindable: YES Available Colors: Natural and Soft Purple |
Uses: Base layer in foot orthotics, arch fill, postings, and heel lifts.
| Item | Dimension | Iron | Case |
| SDUR-00054 | 1/8" | 6 | 24 |
| SDUR-00077 | 1/4" | 12 | 12 |
| SDUR-00078 | 1/2" | 24 | 6 |
