Orthotic Materials



Microcel Puff Variations

Durometer

Durometer: a means of identifying hardness of a material, defined as the "material's resistance to permanent indentation". Durometer can refer to both the measurement, as well as the instrument used to generate the measurement. Our orthotic materials are based on a Shore A Durometer, which is the standard of measurement for orthopaedic materials.

Iron

A very old, yet traditional measurement in the shoe industry, iron is used to measure the thickness of materials. One iron is equal to 1/48 inch (0.5292 millimeter), so, for example, a sole 1/4 inch thick is described as "12 iron".

Sheet Size

Determines the size to which a given sheet of material is cut and the depth of that material. Sheets are not a uniform dimension. They typically will be available in a full sheet, half sheet, roll or wheel. See the individual description to determine the amount of each material.

Molding Temperature

This is the recommended temperature, given in degrees Fahrenheit, at which orthotic materials should heated for optimal molding. Overheated may cause the material to melt or shrink, making it unusable. Under heating may result in a lack of moldability.

Grindability

Defines whether or not the orthotic material can be used on a grinder, such as the Sanigrinder.

Laminate

This is the number of layers or materials glued together to form a single sheet. Material laminates possess some distinct advantages over single layer materials. A characteristic, which is poor in one material, may be offset by the same characteristic, which is strong in another material. Laminating two such materials together, or otherwise using them in conjunction, produces a better functioning material. Materials used in this manner possess all of the good qualities and none of the weaker qualities of its' component materials.


For more information on any of our fabricated orthotic materials, contact an Acor Orthopaedic representative today.

 
 
 

Materials

XRD is Extreme Impact Protection
XRD Extreme Impact Protection

XRD® Extreme Impact Protection

XRD® Extreme Impact Protection is a lightweight, thin and breathable material that's engineered for repeated impact and shock absorption, absorbing up to 90% of energy when impacted at high strain rates!*

Infused with antimicrobial protection, it helps prevent the growth of bacteria that causes stains and odors.

*According to ASTM F1614-C
XRD is a licensed trademark of Rogers Corporation

XRD Extreme Impact Protection in sheet form
logo for XRD Extreme Impact Protection
  • Breathable, open-cell technology
  • Soft to the touch, yet firm on impact
  • Outperforms the competition
  • Thin and flexible
  • Memory-like foam provides a custom fit to each user
  • Lightweight and low profile
Item Description Dimension
PORS-00800 2.0mm XRD® 30" x 36"
PORS-00801 3.0mm XRD® 30" x 36"
Call ACOR for Information:
800-237-2267
Acor QuikStrip Wheels
Acor QuikStrip Wheels

QuikStrip Wheels

Acor presents QuikStrip Wheels
Sheets of materials in easy-to-use wheels!

Available in many different material combinations.
Perfect for making foot orthotics!

Clean up your work area with QuikStrip Wheels!
BeforeBefore QuikStrip Wheels AfterAfter QuikStrip Wheels

* Sheets of Material in a Box! *

* Improves Fabrication Efficiency *

* Keeps Materials Clean & Dust-Free *

* Reduces Damage to Products *

* Minimizes Wasted Materials *

* Decreases Bulk of Flat Sheets *

* Lowers Shipping Cost *

Acor QuikStrip Wheel in a box
Acor QuikStrip Wheels - FULL Wheels
Item Description Dimensions
MDRW-00092 ⅛" Pink P-Cell® + 1.5mm PORON Medical® Urethane + ⅛" Blue Microcel Puff® 5" x 59" x 11 strips
MDRW-00123 116" Blue Microcel Puff® + 1.5mm 2AB PORON Medical® Urethane 5" x 59" x 26 strips
PCPW-00016 ⅛" Pink P-Cell® + 1.5mm 2AB PORON Medical® Urethane 5" x 59" x 19 strips
PCPW-00017 ⅛" Pink P-Cell® + 3mm 2AB PORON Medical® Urethane 5" x 59" x 14 strips
PCPW-00021 116" Pink P-Cell® + 1.5mm 2AB PORON Medical® Urethane 5" x 59" x 26 strips
PCPW-00022 116" Pink P-Cell® + 3mm 2AB PORON Medical® Urethane 5" x 59" x 19 strips
PORW-90395 1.5mm 1AB PORON Medical® Urethane 5" x 165' x 1 strip
PORW-90386 1.5mm 2AB PORON Medical® Urethane 5" x 165' x 1 strip
PORW-90393 3.0mm 1AB PORON Medical® Urethane 5" x 80' x 1 strip
PORW-90394 3.0mm 2AB PORON Medical® Urethane 5" x 80' x 1 strip
PUFW-00004 ⅛" Blue Microcel Puff® 5" x 60" x 26 strips
PUFW-00011 ¼" Blue Microcel Puff® 5" x 60" x 14 strips
PUFW-00766 ⅛" Storm Microcel Puff®* 4½" x 60" x 26 strips
SDRW-00022 Navy Blue Vinyl 5" x 150' x 1 strip
SDRW-00204 Royal Blue Nylon + ⅛" NeoSponge™ 5" x 48" x 30 strips
SDRW-00218 ⅛" Pink P-Cell® 5" x 60" x 26 strips
SDRW-00264W Cordura Fabric 5" x 150' x 1 strip
SDRW-00270 Coronet MITIKA ASL Fabric - Black 5" x 164' x 1 strip
SDRW-00271 Coronet MITIKA ASL Fabric - Beige 5" x 164' x 1 strip
TRMW-00004 116" Blue Microcel Puff® + 1.5mm PORON Medical® Urethane + ⅛" Blue Microcel Puff® 5" x 59" x 14 strips
XSPORW-00001 X-Static® + 1.5mm 1AB PORON Medical® Urethane 5" x 165' x 1 strip
XSPORW-00002 X-Static® + 3.0mm 1AB PORON Medical® Urethane 5" x 80' x 1 strip
XSPUFW-00009 X-Static® + ⅛" Black Impression Puff™ 5" x 58" x 26 strips
XSSDRW-00012 X-Static® + ⅛" NeoSponge™ 5" x 48" x 30 strips

Back to top of page

Shop Acor QuikStrip Wheels

Acor DuraFORM EVA
Acor DuraFORM low density EVA

DuraFORM


This new low density EVA delivers unsurpassed performance.

Think of it as an upgraded Microcel Puff®.

DuraFORM provides excellent elasticity, improved cushioning and dimensionally stable properties.

DuraFORM is produced as a closed cell structure.

It won't absorb perspiration and is easy to clean.

DuraFORM
Durometer: 30 Shore A (±5)
Sheet Size: 42" x 34"
Thicknesses: 116", 18", 14"
Composition: EVA
Molding Temperature: 225°-275° F 2-3 min.
Grindable: YES
Available Colors: Light Blue, Black
Uses: foot orthotics, base layers, topcovers, prosthetic liners

Light Blue Black Dimension Case
PUFF-00730 PUFF-00733 116" 48
PUFF-00731 PUFF-00734 ⅛" 24
PUFF-00739 PUFF-00748 316" 16
PUFF-00732 PUFF-00735 ¼" 12

Shop Acor DuraFORM
 

Contact Acor to find out about products that can be made with DuraFORM.

Acor DuraFORM high quality EVA products

Back to top of page

Acor P-Cell EVA
Acor P-Cell EVA

Acor P-Cell®


P-Cell® is a closed cell EVA foam that has been tested by independent research companies against Plastazote® for abrasion, coefficient of friction, moisture deflection, durability and tensile strength.

P-Cell® was proven to be superior to Plastazote® in each and every test. In fact, after walking for 7½ miles on P-Cell®, there was less "packdown" than a brand new piece of Plastazote® run through an identical test!

P-Cell®
Durometer: 20 Shore A (±5)
Sheet Size: 37" x 30"
Composition: Proprietary Composite
Molding Temperature: 225°-275° F 2-3 min.
Grindable: YES
Available Colors: Blue, Pink, Black, Silver
Uses: Top covers, AFO interface, soft goods interface and distal end pads

Silver Blue Pink Black Dimension Case
SDUR-00367 SDUR-00355 SDUR-00255 SDUR-00320 116" 48
SDUR-00368 SDUR-00354 SDUR-00256 SDUR-00318 ⅛" 24
SDUR-00369 SDUR-00353 SDUR-00257 SDUR-00321 316" 16
SDUR-00370 SDUR-00352 SDUR-00258 SDUR-00322 ¼" 12
SDUR-00371 SDUR-00351 SDUR-00259 SDUR-00319 ⅜" 8
SDUR-00372 SDUR-00349 SDUR-00260 SDUR-00323 ½" 6
SDUR-00373 SDUR-00350 SDUR-00261 SDUR-00324 ¾" 4
SDUR-00374 SDUR-00348 SDUR-00262 SDUR-00325 1" 3

P-CELL® vs PLASTAZOTE®: According to independent testing through SATRA, Artech, and the SGS U.S. Testing company, P-Cell® is a superior product to Plastazote®.

Superior Cushioning: P-Cell® packs down 27% less than Plastazote®.

Shock Absorption: P-Cell® absorbs shock 41% more than Plastazote®.

Tensile Strength: P-Cell® has 114% greater tensile strength than Plastazote®, which results in less tearing.

Moisture Deflection: P-Cell® deflects moisture 209% more than Plastazote®.



Abrasion: A less abrasive insole can help protect the diabetic. The more abrasive the surface of the material, the more likely the skin will become irritated, which may result in blistering or ulcerations. P-Cell® is a smooth, closed cell product which does not hurt the skin.

Coefficient of Friction: A secure grip inside a shoe or orthotic device prevents shear. Excessive movement can allow the skin to rub, resulting in soreness. P-Cell® helps to prevent this movement and is better for a diabetic patient.

Moisture Deflection: Insoles that absorb body fluids are harder to keep clean and allow for bacterial growth near the skin. Bacteria can lead to complications and infections. P Cell® has a high moisture deflection that does not allow the moisture to soak in.


To download the comparison study click HERE:icon indicating this file is a PDF
Shop Acor P-Cell

Back to top of page

Plastazote
Plastazote foam

Plastazote®


Plastazote® is a closed cell cross-linked polyethylene foam.

A wide range of polymer combinations is available to give increased stiffness, improved temperature resistance and improved mouldability.

Application areas include packaging, protective padding in contact sports, automotive, health care and building.

The inert qualities of Plastazote® have led to its widespread use in healthcare applications, such as orthotics.

Plastazote® Medium LD45
Density: LD45
Sheet Size: 40" x 40"
Composition: Closed cell polyethylene
Molding Temperature: 250°-275° F 2-3 min.
Grindable: YES
Available Colors: Pink, White, Blue, Greeen, Yellow, Black, Red
Uses: Top covers in orthotics and AFO interfaces

Dim Pink White Blue Green Case
116" PLZT-00064 PLZT-00127 PLZT-00106 PLZT-00081 48
18" PLZT-00059 PLZT-00029 PLZT-00034 PLZT-00035 24
316" PLZT-00062 PLZT-00137 PLZT-00103 PLZT-00139 16
14" PLZT-00060 PLZT-00145 PLZT-00075 PLZT-00147 12
38" PLZT-00108 PLZT-00153 PLZT-00155 PLZT-00157 8
12" PLZT-00061 PLZT-00165 PLZT-00073 PLZT-00167 6
34" PLZT-00065 PLZT-00175 PLZT-00177 PLZT-00179 4
1" PLZT-00063 PLZT-00187 PLZT-00189 PLZT-00191 3

Dim Yellow Black Red Case
116" PLZT-00129 PLZT-00131 PLZT-00133 48
18" PLZT-00135 PLZT-00066 PLZT-00033 24
316" PLZT-00141 PLZT-00093 PLZT-00143 16
14" PLZT-00149 PLZT-00112 PLZT-00151 12
38" PLZT-00159 PLZT-00161 PLZT-00163 8
12" PLZT-00169 PLZT-00171 PLZT-00173 6
34" PLZT-00181 PLZT-00183 PLZT-00185 4
1" PLZT-00193 PLZT-00025 PLZT-00195 3

Back to top of page

 

Plastazote Firm LD70 foam
Plastazote® Firm LD70
Density: LD70
Sheet Size: 34" x 33"
Composition: Closed cell polyethylene
Molding Temperature: 250°-275° F 2-3 min.
Grindable: YES
Available Colors: White, Black
Uses: Base layer in foot orthotics and light posting

Dim White Black Case
116" PLZT-00058 PLZT-00316 48
18" PLZT-00054 PLZT-00304 24
316" PLZT-00057 PLZT-00310 16
14" PLZT-00055 PLZT-00301 12
38" PLZT-00117 PLZT-00309 8
12" PLZT-00056 PLZT-00346 6
34" PLZT-00026 PLZT-00299 4
1" PLZT-00124 PLZT-00388 3

Back to top of page

 

Plastazote Rigid HD115 foam
Plastazote® Rigid HD115
Density: HD115
Sheet Size: 37" x 25"
Composition: Closed cell polyethylene
Molding Temperature: 275°-300° F 2-3 min.
Grindable: YES
Available Colors: Black
Uses: Lightweight base layer in foot orthotics and elevations

Dim Black Case
⅛" PLZT-00066 24
¼" PLZT-00067 12
⅜" PLZT-00097 8
½" PLZT-00068 6
Shop Plastazote

Back to top of page

Acor Microcel Puff EVA

Puff 35    Puff 45    Puff Firm 55    Impression Puff

Acor Microcel Puff

Acor Microcel Puff®


Microcel Puff® is an Ethylene Vinyl Acetate (EVA) foam. EVA is a wonderful shock absorber that is heat moldable and has excellent shape retention.

Microcel Puff® is available in a variety of colors and thicknesses. Because of its versatile uses it is among the most popular of our manufacturing materials.

Microcel Puff® is used in more than just footwear. This amazing material has uses in hundreds of other industries.

Microcel Puff® 35
Durometer: 35 Shore A (±5)
Sheet Size: 37" x 30"
Composition: EVA
Molding Temperature: 225°-275° F 2-3 min.
Grindable: YES
Available Colors: Blue, Pink, White, Black, Forest Green, Green, Purple, Aqua, Red, Blue/Black/Aqua (BBA), Yellow/Red/Blue/Green (YRBG), Pink/Purple/White (PPW), Green/Purple/White (GPW), Black Ice, Storm, Green Camouflage
Uses: Top and bottom layers in foot orthotics, lifts, postings and prosthetic liners

Dim Blue Pink White Black Forest Grn Case
116" PUFF-00067 PUFF-00068 PUFF-00071 PUFF-00134 PUFF-00187 48
18" PUFF-00074 PUFF-00075 PUFF-00079 PUFF-00021 PUFF-00188 24
316" PUFF-00206 PUFF-00062 PUFF-00063 PUFF-00390 PUFF-00189 16
14" PUFF-00105 PUFF-00093 PUFF-00133 PUFF-00387 PUFF-00191 12
38" PUFF-00208 PUFF-00213 PUFF-00199 PUFF-00308 PUFF-00192 8
12" PUFF-00108 PUFF-00215 PUFF-00121 PUFF-00399 PUFF-00194 6
58" PUFF-00209 PUFF-00216 PUFF-00201 PUFF-00256 PUFF-00195 5
34" PUFF-00211 PUFF-00218 PUFF-00202 PUFF-00231 PUFF-00197 4
1" PUFF-00212 PUFF-00220 PUFF-00204 PUFF-00232 PUFF-00198 3

Dim Green Purple Yellow Aqua Red Case
116" PUFF-00106 PUFF-00404 PUFF-00244 PUFF-00097 PUFF-00843 48
18" PUFF-00076 PUFF-00119 PUFF-00246 PUFF-00098 PUFF-00845 24
316" PUFF-00242 PUFF-00335 PUFF-00247 PUFF-00116 PUFF-00847 16
14" PUFF-00107 PUFF-00132 PUFF-00120 PUFF-00110 PUFF-00849 12
38" PUFF-00254 PUFF-00268 PUFF-00269 PUFF-00117 PUFF-00851 8
12" PUFF-00113 PUFF-00109 PUFF-00405 PUFF-00111 PUFF-00853 6
58" PUFF-00257 PUFF-00261 PUFF-00262 PUFF-00118 PUFF-00855 5
34" PUFF-00271 PUFF-00272 PUFF-00273 PUFF-00127 PUFF-00857 4
1" PUFF-00274 PUFF-00281 PUFF-00282 PUFF-00131 PUFF-00893 3

Dim BBA YRBG PPW GPW Case
116" PUFF-00066 PUFF-00072 PUFF-00370 PUFF-00353 48
18" PUFF-00073 PUFF-00080 PUFF-00372 PUFF-00355 24
316" PUFF-00221 PUFF-00233 PUFF-00374 PUFF-00357 16
14" PUFF-00103 PUFF-00115 PUFF-00376 PUFF-00359 12
38" PUFF-00223 PUFF-00389 PUFF-00378 PUFF-00361 8
12" PUFF-00104 PUFF-00114 PUFF-00380 PUFF-00363 6
58" PUFF-00225 PUFF-00398 PUFF-00382 PUFF-00365 5
34" PUFF-00226 PUFF-00283 PUFF-00384 PUFF-00367 4
1" PUFF-00228 PUFF-00293 PUFF-00386 PUFF-00369 3

Dim Black Ice Storm Grn Camo Case
116" PUFF-00761 PUFF-00763 PUFF-00916 48
18" PUFF-00765 PUFF-00767 PUFF-00915 24
316" PUFF-00769 PUFF-00771 PUFF-00919 16
14" PUFF-00773 PUFF-00775 PUFF-00917 12
38" PUFF-00777 PUFF-00779 PUFF-00921 8
12" PUFF-00781 PUFF-00783 PUFF-00918 6
58" PUFF-00785 PUFF-00787 PUFF-00922 5
34" PUFF-00789 PUFF-00791 PUFF-00920 4
1" PUFF-00830 PUFF-00831 PUFF-00914 3
Shop Acor Microcel Puff 35

Back to top of page

 

Microcel Puff 45 EVA foam
Microcel Puff® 45 EVA foam
Durometer: 45 Shore A (±5)
Sheet Size: 37" x 30"
Composition: EVA
Molding Temperature: 225°-275° F 2-3 min.
Grindable: YES
Available Colors: White, Black, Navy
Uses: Top and bottom layers in foot orthotics, lifts, postings, arch fill and prosthetic liners

Dim White Black Navy Case
116" PUFF-00721 PUFF-00859 PUFF-00877 48
18" PUFF-00722 PUFF-00863 PUFF-00879 24
316" PUFF-00576 PUFF-00865 PUFF-00881 16
14" PUFF-00578 PUFF-00867 PUFF-00883 12
38" PUFF-00835 PUFF-00869 PUFF-00885 8
12" PUFF-00580 PUFF-00871 PUFF-00887 6
58" PUFF-00723 PUFF-00873 PUFF-00889 5
34" PUFF-00582 PUFF-00875 PUFF-00891 4
1" PUFF-00574 PUFF-00895 PUFF-00897 4
Shop Acor Microcel Puff 45

Back to top of page

 

Microcel Puff Firm 55 EVA foam
Microcel Puff® Firm 55 EVA foam
Durometer: 55 Shore A (±5)
Sheet Size: 34" x 33"
Composition: EVA
Molding Temperature: 275°-300° F 4-5 min.
Grindable: YES
Available Colors: Black, Red, Navy, Brown, White
Uses: Base layers in foot orthotics, postings, scaphoid reinforcement

Dim Black Red Navy Brown White Case
116" PUFF-00158 PUFF-00284 PUFF-00929 PUFF-00298 PUFF-00309 48
18" PUFF-00276 PUFF-00286 PUFF-00931 PUFF-00300 PUFF-00310 24
316" PUFF-00278 PUFF-00288 PUFF-00933 PUFF-00301 PUFF-00157 16
14" PUFF-00280 PUFF-00290 PUFF-00935 PUFF-00303 PUFF-00312 12
38" PUFF-00155 PUFF-00295 PUFF-00937 PUFF-00304 PUFF-00170 8
12" PUFF-00125 PUFF-00406 PUFF-00939 PUFF-00306 PUFF-00142 6
58" PUFF-00033 PUFF-00045 PUFF-00941 PUFF-00069 PUFF-00084 5
34" PUFF-00147 PUFF-00426 PUFF-00943 PUFF-00305 PUFF-00099 4
1" PUFF-00061 PUFF-00725 PUFF-00945 PUFF-00411 PUFF-00327 3
Shop Acor Microcel Puff Firm 55

Back to top of page

 

Microcel Puff Firm 55 EVA foam
Impression Puff
Durometer: 25 Shore A (±5)
Sheet Size: 40' x 29" (Black/X-Static®), 41" x 32" (Light Blue)
Composition: EVA
Molding Temperature: 250°-275° F 2-3 min.
Grindable: YES
Available Colors: Black/X-Static®, Light Blue
Uses: Top layer in foot orthotics, body jacket linings and other padding uses

Black/X-Static Light Blue Dimension Case
XSPUFF-00012 N/A 116" 48
XSPUFF-00010 XSPUFF-00724 18" 24
Shop Acor Impression Puff

Back to top of page

PORON sheets
PORON urethane sheets

PORON® Soft Supporting


PORON® cellular urethanes are engineered, medium density microcellular (cells are roughly 100 microns in diameter) foam materials. They are used in orthopedic and prosthetic applications, including custom orthotics, prefabricated orthotics, prosthetic padding and other biomechanical supports.

  • Shock absorbing to protect against impact
  • Breathable to keep you dry and cool
  • Maintains cushioning for maximum performance
  • Lightweight and flexible for continuous comfort

Explaining 1AB/2AB/UAB Finishes

During the process of producing polyurethane a non-porous, unabraded "skin" forms which is resistant to adhesives. An abraded surface is much more effective when desiring a bond with another materials. Depending upon your needs, Acor can provide you with Unabraded (UAB), Single Abraded (1AB) or Double Abraded (2AB) surfaces on your polyurethane. Scrim covering adds strength and makes it easier to bond to other materials.

PORON® Soft Supporting Urethane
Sheet Size: 30" x 18", 30" x 36"
Composition: Cellular Urethane
Molding Temperature: N/A
Grindable: YES
Available Colors: Blue, Beige, Onyx
Uses: Central core of foot orthotics, plugs, reliefs, and many other uses

1.5mm 3 Iron 48/case
Item Dimensions Details
PORS-00600 30" x 36" Blue, 1AB
PORS-00601 30" x 36" Blue, 2AB
PORS-00602 30" x 36" Blue, UAB
PORS-00603 30" x 18" Blue, 1AB
PORS-00604 30" x 18" Blue, 2AB
PORS-00605 30" x 18" Blue, UAB
PORS-00606 30" x 36" Beige, 1AB
PORS-00607 30" x 36" Beige, 2AB
PORS-00608 30" x 36" Beige, UAB
PORS-00609 30" x 18" Beige, 1AB
PORS-00610 30" x 18" Beige, 2AB
PORS-00611 30" x 18" Beige, UAB
PORS-00090 30" x 36" Onyx, 1AB

Back to top of page

3.0mm 6 Iron 24/case
Item Dimensions Details
PORS-00612 30" x 36" Blue, 1AB
PORS-00613 30" x 36" Blue, 2AB
PORS-00614 30" x 36" Blue, UAB
PORS-00615 30" x 18" Blue, 1AB
PORS-00616 30" x 18" Blue, 2AB
PORS-00617 30" x 18" Blue, UAB
PORS-00618 30" x 36" Beige, 1AB
PORS-00619 30" x 36" Beige, 2AB
PORS-00620 30" x 36" Beige, UAB
PORS-00621 30" x 18" Beige, 1AB
PORS-00622 30" x 18" Beige, 2AB
PORS-00623 30" x 18" Beige, UAB
PORS-00091 30" x 36" Onyx, 1AB

Back to top of page

6.0mm 12 Iron 12/case
Item Dimensions Details
PORS-00624 30" x 36" Blue, 1AB
PORS-00625 30" x 36" Blue, 2AB
PORS-00626 30" x 36" Blue, UAB
PORS-00627 30" x 18" Blue, 1AB
PORS-00628 30" x 18" Blue, 2AB
PORS-00629 30" x 18" Blue, UAB
PORS-00630 30" x 36" Beige, 1AB
PORS-00631 30" x 36" Beige, 2AB
PORS-00632 30" x 36" Beige, UAB
PORS-00633 30" x 18" Beige, 1AB
PORS-00634 30" x 18" Beige, 2AB
PORS-00635 30" x 18" Beige, UAB
PORS-00092 30" x 36" Onyx, 1AB

Back to top of page

9.5mm 18 Iron 8/case
Item Dimensions Details
PORS-00600 30" x 36" Blue, 1AB
PORS-00601 30" x 36" Blue, 2AB
PORS-00602 30" x 36" Blue, UAB
PORS-00603 30" x 18" Blue, 1AB
PORS-00604 30" x 18" Blue, 2AB
PORS-00605 30" x 18" Blue, UAB
PORS-00606 30" x 36" Beige, 1AB
PORS-00607 30" x 36" Beige, 2AB
PORS-00608 30" x 36" Beige, UAB
PORS-00609 30" x 18" Beige, 1AB
PORS-00610 30" x 18" Beige, 2AB
PORS-00611 30" x 18" Beige, UAB
PORS-00090 30" x 36" Onyx, 1AB
Shop PORON Urethane Sheets

Back to top of page

 

SRP Slow Recover PORON sheets
Slow Recovery Polyurethane (SRP is a unique custom contouring material that rebounds slowly when compressed, which results in a custom fit or contour during each use. The material will continue to return to its original shape when not in use.

SRP (Slow Recovery PORON) - patina
Item Dimensions Details
PORS-00001 6mm x 30" x 36" Patina, UAB
PORS-00005 6mm x 30" x 18" Patina, UAB
PORS-00009 3mm x 30" x 36" Patina, UAB
PORS-00010 3mm x 30" x 18" Patina, UAB
PORS-00018 1.5mm x 30" x 36" Patina, 1AB
PORS-00019 1.5mm x 30" x 18" Patina, 1AB
Shop PORON SRP Sheets

Back to top of page

 

Fabric covered PORON sheets
PORON® Urethane with Laminated Fabric Top Cover
Item Dimensions Details
PORS-00104 1.5mm x 30" x 18" Blue, 1AB
PORS-00055 3mm x 30" x 18" Blue, 1AB
PORS-00054 3mm x 30" x 36" Blue, 1AB
PORS-00130 1.5mm x 30" x 36" Blue, 1AB

Scrim covered PORON sheets
PORON® Urethane with Laminated Scrim Top Cover
Item Dimensions Details
PORS-00194 3mm x 30" x 18" Blue, 1AB
PORS-00184 3mm x 30" x 36" Blue, 1AB

X-Static covered PORON sheets
PORON® Urethane with Laminated X-Static® Top Cover
Item Dimensions Details
XSPORS-00003 1.5mm x 27" x 36" Blue, 1AB
XSPORS-00004 3mm x 27" x 36" Blue, 1AB
Shop Laminated PORON Sheets

Back to top of page

 

Urethane Rolls

Urethane rolls
Urethane Rolls
Item Dimensions Sq. Feet Details
PORR-00090 1.5mm x 60" x 165' 825 SF Blue, 2AB
PORR-00093 3.0mm x 60" x 80' 400 SF Blue, 2AB
PORR-00078 3.0mm x 60" x 165' 825 SF Blue, 2AB
PORR-00092 6.0mm x 60" x 80' 400 SF Blue, 2AB

Back to top of page

PORON® Urethane Rolls
PORR-90395 1.5mm x 60" x 165' 825 SF Blue, 1AB
PORR-90386 1.5mm x 60" x 165' 825 SF Blue, 2AB
PORR-90622 3.0mm x 60" x 165' 825 SF Blue, UAB
PORR-90651 3.0mm x 60" x 165' 825 SF Blue, 2AB
PORR-90393 3.0mm x 60" x 80' 400 SF Blue, 1AB
PORR-90394 3.0mm x 60" x 80' 400 SF Blue, 2AB
PORR-90631 6.0mm x 60" x 80' 400 SF Blue, UAB
PORR-90652 6.0mm x 60" x 80' 400 SF Blue, 2AB
PORR-90653 6.0mm x 60" x 80' 400 SF Blue, 1AB
PORR-90660 1.5mm x 60" x 165' 825 SF Beige, 1AB
PORR-90661 1.5mm x 60" x 165' 825 SF Beige, 2AB
PORR-90663 3.0mm x 60" x 80' 400 SF Beige, 1AB
PORR-90664 3.0mm x 60" x 80' 400 SF Beige, 2AB
PORR-90623 3.0mm x 60" x 165' 825 SF Beige, UAB
PORR-90662 3.0mm x 60" x 165' 825 SF Beige, 2AB
PORR-90632 6.0mm x 60" x 80' 400 SF Beige, UAB
PORR-90665 6.0mm x 60" x 80' 400 SF Beige, 2AB
PORR-90656 6.0mm x 60" x 80' 400 SF Beige, 1AB

Back to top of page

Urethane with Scrim Rolls
Item Dimensions Sq. Feet Details
PORR-00110 1.5mm x 54 " x 300' 1350 SF Blue, 1AB
PORR-00109 3.0mm x 54 " x 165' 742.5 SF Blue, 1AB
PORR-00111 3.0mm x 54 " x 165' 742.5 SF Onyx, 1AB

Back to top of page

PORON® with X-Static® Rolls
Item Dimensions Sq. Feet Details
XSPORR-00001 1.5mm x 54" x 165' 742.5 SF Blue, 1AB
XSPORR-00002 3.0mm x 54" x 80' 360 SF Blue, 1AB

Back to top of page

SRP Slow Recovery PORON Rolls
SRP (Slow Recovery PORON) Rolls
PORX-00053 6.0mm x 60" x 80' 400 SF Patina, UAB
PORX-00064 3.0mm x 60" x 165' 825 SF Patina, UAB
PORX-00054 3.0mm x 60" x 80' 400 SF Patina, 1AB
PORX-00016 1.5mm x 60" x 165' 825 SF Patina, 1AB

Back to top of page

Urethane with Laminated Fabric Rolls
PORR-00038 1.5mm x 60" x 165' 825 SF Blue, 1AB
PORR-00108 3.0mm x 60" x 165' 825 SF Blue, 1AB
* Shop Urethane Rolls - WHOLESALE *

* You must be logged in as a wholesale customer to purchase Urethane Rolls *

Back to top of page

 

PORON® Urethane Wheels
  PORW-90395 1.5mm x 5" x 165' 68.75 SF Blue, 1AB
  PORW-90395S 1.5mm x 5" x 55' 23 SF Blue, 1AB
  PORW-90386 1.5mm x 5" x 165' 68.75 SF Blue, 2AB
  PORW-90386S 1.5mm x 5" x 55' 23 SF Blue, 2AB
  PORW-90393 3.0mm x 5" x 80' 33.33 SF Blue, 1AB
  PORW-90393S 3.0mm x 5" x 40' 16.67 SF Blue, 1AB
  PORW-90394 3.0mm x 5" x 80' 33.33 SF Blue, 2AB
  PORW-90394S 3.0mm x 5" x 40' 16.87 SF Blue, 2AB

PORON® Urethane eith X-Static® Wheels
 XSPORW-00001 1.5mm x 5" x 165' 68.75 SF Blue, 1AB
 XSPORW-00001S 1.5mm x 5" x 40' 16.67 SF Blue, 1AB
 XSPORW-00002 3.0mm x 5" x 80' 33.33 SF Blue, 1AB
 XSPORW-00002S 3.0mm x 5" x 20' 8.33 SF Blue, 1AB
Shop Urethane Wheels

Back to top of page

Acor NeoSponge synthetic rubber
Acor NeoSponge synthetic rubber

NeoSponge


NeoSponge is a porous, synthetic rubber material designed to flex, have great durability, and be resistant to breakdown by water. It is form fitting and resilient.

The many uses of NeoSponge include: elbow and knee pads, orthopedic braces, and orthotics.

Acor offers two styles of NeoSponge - with blue fabric or X-Static® top covers.

NeoSponge
Durometer: 15 Shore A (±5)
Sheet Size: 42" x 24", 42" x 48"
Thicknesses: 116", 18"
Composition: Synthetic Rubber
Molding Temperature: N/A
Grindable: YES
Available Colors: Black, with blue or black fabric or X-Static® laminated covering
Uses: top covers in foot orthotics, padding

Item Description Dimensions Case
SDUR-00203
Royal Blue Nylon + 116" NeoSponge
42" x 24" 48
SDUR-00205
Royal Blue Nylon + 116" NeoSponge
42" x 48" *
SDUR-00206
Royal Blue Nylon + 18" NeoSponge
42" x 24" 24
SDUR-00204
Royal Blue Nylon + 18" NeoSponge
42" x 48" *
SDUR-00306
Black Nylon + 116" NeoSponge
42" x 24" 48
SDUR-00305
Black Nylon + 116" NeoSponge
42" x 48" *
SDUR-00307
Black Nylon + 18" NeoSponge
42" x 24" 24
SDUR-00304
Black Nylon + 18" NeoSponge
42" x 48" *
XSSDUR-00018
Black X-Static + 116" NeoSponge
42" x 24" 48
XSSDUR-00017
Black X-Static + 116" NeoSponge
42" x 48" *
XSSDUR-00007
Black X-Static + 18" NeoSponge
42" x 24" 24
XSSDUR-00012
Black X-Static + 18" NeoSponge
42" x 48" *

Shop Acor NeoSponge
Acor FM firm materials
Microcel Puff FM firm materials

FM Firm Material


FM™, which stands for Firm Material, is a 65 durometer, heat moldable EVA. It is grindable, and is one of the highest sources of rigidity for orthoses, short of plastic. Use FM™ for the bottom-most, arch filler of foot orthoses. It works equally well as a mid-sole or split-sole wedge.

FMFirm Material
Durometer: 65 Shore A (±5)
Sheet Size: 37" x 30"
Composition: EVA
Molding Temperature: 275°-300° F 4-5 min.
Grindable: YES
Available Colors: Black, White
Uses: Base and center core of foot orthotics, midsoles and heavy posting

White Black Dimension Case
SDUR-00407 SDUR-00394 116" 48
SDUR-00400 SDUR-00411 18" 24
SDUR-00405 SDUR-00395 316" 16
SDUR-00402 SDUR-00412 14" 12
SDUR-00409 SDUR-00396 38" 8
SDUR-00410 SDUR-00397 12" 6

Shop Acor FM EVA Material
Acor QuikForm Materials
Acor QuikForm Materials

QuikForm Materials


QuikForm® is thin, flexible and easily heat molded or vacuum formed.

This material is an impregnated fiber resin and is self-adherent for some applications but can be glued if needed.

Layers can be combined for added support. QuikForm® is impervious to perspiration and moisture.

QuikForm
Sheet Size: 40" x 20"
Composition: Impregnated fiber resin
Molding Temperature: 250°-275° F 1-1.5 min.
Grindable: YES
Available Colors: White
Uses: Reinforcement for foot orthotics and ankle gauntlets, fracture bracing

QuikForm® Firm has the characteristics of thermoplastic. It is thin and flexible yet firm and can be easily heat molded and vacuum formed.

The fabric cover allows the use of adhesives for a secure bond. QuikForm Firm is impervious to perspiration and moisture.


QuikForm Firm
Sheet Size: 36" x 18"
Composition: Impregnated fiber resin
Molding Temperature: 350°F 2-3 min.
Grindable: YES
Available Colors: White
Uses: Reinforcement for foot orthotics and ankle gauntlets, fracture bracing

Acor QuikForm and QuikForm Firm
Item Description Case
SDURW-00064 1.6mm x 40" x 20" QuikForm 48
SDURW-00251 1.6mm x 36" x 18" QuikForm Firm 48

Shop Acor QuikForm

Volara 4E padding
Volara 4E

Volara ® 4E


Volara® 4E is a soft density, close cell, cross-linked polyethylene foam padding material. It is used as a lining for body jackets and lower extremity orthoses, including cushioning for orthotics.

Volara® 4E
Durometer: 23 Shore A (±5)
Sheet Size: 30" x 36"
Composition: Polyethylene Foam
Molding Temperature: 300°F 3 min.
Grindable: YES
Available Colors: White
Uses: Body jacket liners and soft orthotics

Volara® 4E Sheets
Item Number Dimension Case
SDUR-00055 18" x 30" x 36" 24
SDUR-00072 316" x 30" x 36" 16
SDUR-00050 14" x 30" x 36" 12
SDUR-00071 12" x 30" x 40" 6

Volara® 4E Rolls
Item Number Dimension Sq. Feet
SDUR-00090 18" x 30" x 50' 125 SF
SDUR-00069 18" x 30" x 100' 250 SF
SDUR-00038 18" x 30" x 450' 1125 SF
SDUR-00110 316" x 30" x 50' 125 SF
SDUR-00089 316" x 30" x 100' 250 SF
SDUR-00039 316" x 30" x 300' 750 SF
SDUR-00091 14" x 30" x 50' 125 SF
SDUR-00051 14" x 30" x 100' 250 SF
SDUR-00040 14" x 30" x 200' 500 SF

Shop Volara 4E
Acor Top Cover Sheets
Acor top cover sheets

Acor Top Cover Sheets


Top Cover Sheets are often used as an additional layer to protect the foot from underlying materials. Top covers add an aesthetic value to a custom orthotic. Also see pre-made top covers.

Acor Top Cover Sheets
Item Number Dimension Description
SDUR-00083 116" x 36" x 27" Black Vinyl
SDUR-00084 116" x 36" x 27" Navy Vinyl
SDUR-00085 116" x 36" x 27" White Vinyl
SDUR-00206 18" x 42" x 24" Royal Blue Nylon w/Neo-Sponge
SDUR-00306 116" x 42" x 24" Black Nylon w/Neo-Sponge
SDUR-00307 18" x 42" x 24" Black Nylon w/Neo-Sponge
PORS-00104 116" x 30" x 18" Navy Fabric w/Urethane-1AB
PORS-00055 18" x 30" x 18" Navy Fabric w/Urethane-1AB
PORS-00054 18" x 30" x 36" Navy Fabric w/Urethane-1AB
PORS-00130 116" x 30" x 36" Navy Fabric w/Urethane-1AB
SDUR-00270 30" x 59" Coronet MITIKA ASL-Black
SDUR-00290 36" x 60" CORDURA - Black
XSPORS-00003 116" x 27" x 36" 1AB Blue PORON w/X-Static
XSPORS-00004 18" x 27" x 36" 1AB Blue PORON w/X-Static
XSPUFF-00010 18" x 40" x 29" Black Impression Puff w/X-Static
XSPUFF-00012 116" x 40" x 29" Black Impression Puff w/X-Static
XSSDUR-00007 18" x 42" x 24" NeoSponge w/X-Static
XSSDUR-00018 116" x 42" x 24" NeoSponge w/X-Static

Shop Acor Top Cover Sheets
Cork available from Acor

Cork Sheets

Lightweight Cork available from Acor

Lightweight Cork

Made from the bark of the Cork oak tree, light weight cork is ideal for use with elevations and lightweight scaphoid reinforcements.

Lightweight Cork
Durometer: 55 Shore A (±5)
Sheet Size: 28" x 24"
Composition: Natural tree cork
Molding Temperature: N/A
Grindable: YES
Available Colors: Natural
Uses: Metatarsal relief, arch fill, elevations and lightweight scaphoid reinforcements

Item Dimension Case
SDUR-00079 18" 24
SDUR-00080 14" 12
SDUR-00081 12" 6
Shop Acor Lightweight Cork


 

MultiCork available from Acor

Multicork

Acor's own Multicork is an EVA substrate ideal for base layers in foot orthotics and posting.

Multicork
Durometer: 55 Shore A (±5)
Sheet Size: 37" x 30" - Black
                    36" x 30" - Natural
Composition: Natural tree cork and EVA
Molding Temperature: 275°F 3-5 min.
Grindable: YES
Available Colors: Black, Natural
Uses: Base layer in foot orthotics, arch fill, postings and heel lifts

Dim Black Natural Case
18" SDUR-00282 SDUR-00054 24
316" SDUR-00284 N/A 16
14" SDUR-00280 SDUR-00077 12
38" SDUR-00286 SDUR-00122 8
12" SDUR-00278 SDUR-00078 6
Shop Acor Multicork

Back to top of page

 

ThermoCork available from Acor

ThermoCork

Similar to BirkoCork and Elasti-Cork but more economically priced, ThermoCork is a thermo-formable, auto-adhesive compound and is used in base layers for foot orthotics and posting.

This natural latex substrate is a bit more rigid than light weight cork, but has the added ability to be molded.

ThermoCork
Durometer: 60 Shore A (±5)
Sheet Size: 36" x 44"
Composition: Natural tree cork and rubber
Molding Temperature: 275°F 3-5 min.
Grindable: YES
Available Colors: Natural
Uses: Base layer in foot orthotics, sandals, heel postings and arch fill

Item Dimension Case
SDUR-00150 18" 24
SDUR-00151 316" 16
SDUR-00152 14" 12
Shop ThermoCork

Back to top of page

Acor Blockers
Acor Blockers

Acor Blockers


Acor Blockers are pre-laminated, pre-skived sheets of material that, when heated, allow you to fabricate a pair of custom foot orthoses quickly and easily.

The rear-foot portion of the blocker material is thicker than the forefoot, allowing for grinding of posting and edges of the orthoses. These pre-laminated materials save you inventory, space, and time. Numerous styles of Acor Blockers are available to address any clinical need.

Custom combinations are also available upon request.

profile view of single durometer blocker
Acor single durometer blocker
Single Durometer Blockers
Item Description
BLOX-00003 Blue Microcel Puff®
BLOX-00025 Multicork

 
profile view of dual-durometer blocker
Acor dual-durometer blocker
Dual-Durometer Blockers
Item Description
BLOX-00004
 Pink LD45 Plastazote® + White LD70 Plastazote®
BLOX-00005
 35 dur Blue Microcel Puff® + Black FM
BLOX-00014
 Fabric covered PORON® + 35 dur Blue Microcel Puff®
BLOX-00078
 Patina SRP + 35 dur Blue Microcel Puff®
BLOX-00168
 P-Cell® + 35 dur Blue Microcel Puff®
BLOX-00169
 X-Static® lined Impression Puff + 35 dur Blue Microcel Puff®

 
profile view of multi-durometer blocker
Acor dual durometer blocker
Multi-Durometer Blockers
Item Description
BLOX-00006
 Pink LD45 Plastazote® + PORON® + Pink LD45 Plastazote®
BLOX-00007
 Pink LD45 Plastazote® + PORON® + 35 dur Microcel Puff®
BLOX-00008
 White LD70 Plastazote® + FM + White LD70 Plastazote®
BLOX-00009
 35 dur Blue Microcel Puff® + FM + 35 dur Blue Microcel Puff®
BLOX-00010
 35 dur BBA Microcel Puff® + FM + 35 dur BBA Microcel Puff®
BLOX-00011
 35 dur Blue Microcel Puff® + PORON® + 35 dur Blue Microcel Puff®
BLOX-00012
 35 dur BBA Microcel Puff® + PORON® + 35 dur BBA Microcel Puff®
BLOX-00013
 35 dur Blue Microcel Puff® + PORON® + Natural Multicork
BLOX-00037
 Neo-Sponge + FM + White LD70 Plastazote®
BLOX-00072
 P-Cell® + PORON® + 35 dur Blue Microcel Puff®
BLOX-00081
 Pink LD45 Plastazote® + PORON® + Natural Multicork

Shop Acor Blockers

Back to top of page

Blockers for CAD/CAM Machining
Blockers for CAD/CAM Machining

Blockers for CAD/CAM Machining


Modern technology is now being utilized in the fabrication of orthotic appliances and the past several years have seen important advances regarding its application.

CAD/CAM machining, noted for its efficiency and close tolerance accuracy, is now acknowledged as an extremely successful means of designing and producing custom orthoses.

ACOR recognizes that the material requirements for CAD/CAM differ from those of traditional manufacture so for that reason we supply Microcel Puff®, Plastazote®, MultiCork, FM and other materials in various dimensions and densities which are better suited to this form of production.

Custom combinations are also available upon request.


 

Volara® 4E
Durometer: 23 Shore A (±5)
Sheet Size: 30" x 36"
Composition: Polyethylene Foam
Molding Temperature: 300°F 3 min.
Grindable: YES
Available Colors: White
Uses: Body jacket liners and soft orthotics

Acor BLOX-00325 Blockers for CAD/CAM orthotics
 
Acor BLOX-00326 Blockers for CAD/CAM orthotics
 
Acor BLOX-00327 Blockers for CAD/CAM orthotics
 
Acor BLOX-00328 Blockers for CAD/CAM orthotics
 
Acor BLOX-00103 Blockers for CAD/CAM orthotics
 
Acor BLOX-00104 Blockers for CAD/CAM orthotics
 
Acor BLOX-00105 Blockers for CAD/CAM orthotics
 
Acor BLOX-00239 Blockers for CAD/CAM orthotics
 
Acor BLOX-00240 Blockers for CAD/CAM orthotics
 
Acor SLSTRP-00628 Blockers for CAD/CAM orthotics
 
Acor SLSTRP-00396 Blockers for CAD/CAM orthotics
 
Acor BLOX-00094 Blockers for CAD/CAM orthotics
 
Acor BLOX-00106 Blockers for CAD/CAM orthotics
 
Acor BLOX-00336 Blockers for CAD/CAM orthotics
 
Acor BLOX-00337 Blockers for CAD/CAM orthotics
 
Acor BLOX-00236 Blockers for CAD/CAM orthotics
 
Acor BLOX-00237 Blockers for CAD/CAM orthotics
 
Acor BLOX-00238 Blockers for CAD/CAM orthotics
Shop Blockers for CAD/CAM Milling

Back to top of page

Acor multi-laminated sheets
Acor top cover sheets

Acor Laminated Materials


Material Laminates offer some distinct advantages over single layer materials. A characteristic which is lacking in one material may be offset by the same attribute which is strong in another material. Laminating two such materials together, or otherwise using them in conjunction, produces a better functioning product. Materials used in this manner possess all of the good qualities and reduced weaker qualities regarding their components.

Acor produces dual and multi-layer laminated materials.

For more detailed information regarding the specific materials composing these laminates, see their individual pages found in this section.

 

Dual-Durometer Laminates


LD45 Plastazote® + Polyurethane
Item Dimensions Description Case
PZPN-00035 38" x 40" x 20" 14" Pink Plastazote® + 18" 1AB Blue Polyurethane 8
PZPN-00036 316" x 40" x 20" 18" Pink Plastazote® + 116" 1AB Blue Polyurethane 16
PZPN-00037 14" x 40" x 20" 18" Pink Plastazote® + 18" 1AB Blue Polyurethane 12
PZPN-00050 14" x 40" x 20" 18" Pink Plastazote® + 18" 2AB Blue Polyurethane 12

P-Cell® + Polyurethane
Item Dimensions Description Case
PCPN-00005 38" x 37" x 28" 14" Pink P-Cell® + 18" 1AB Blue Polyurethane 8
PCPN-00006 316" x 37" x 28" 18" Pink P-Cell® + 116" 1AB Blue Polyurethane 16
PCPN-00007 14" x 37" x 28" 18" Pink P-Cell® + 18" 1AB Blue Polyurethane 12
PCPN-00013 38" x 37" x 14" 14" Pink P-Cell® + 18" 1AB Blue Polyurethane 8
PCPN-00014 316" x 37" x 14" 18" Pink P-Cell® + 116" 1AB Blue Polyurethane 16
PCPN-00015 14" x 37" x 14" 18" Pink P-Cell® + 18" 1AB Blue Polyurethane 12
PCPN-00023 316" x 37" x 27" 18" Black P-Cell® + 116" 2AB Onyx Polyurethane 16
PCPN-00024 14" x 37" x 27" 18" Black P-Cell® + 18" 2AB Onyx Polyurethane 12
PCPN-00025 316" x 37" x 27" 18" Pink P-Cell® + 116" 2AB Onyx Polyurethane 16
PCPN-00026 14" x 37" x 27" 18" Pink P-Cell® + 18" 2AB Onyx Polyurethane 12
PCPN-00028 316" x 37" x 27" 18" Black P-Cell® + 116" 2AB Blue Polyurethane 16

LD45 Plastazote® + SRP
Item Dimensions Description Case
PZPN-00062 14" x 40" x 20" 18" Pink Plastazote + 18" Patina SRP 12

P-Cell® + SRP
Item Dimensions Description Case
PCPN-00008 14" x 29" x 18" 18" Pink P-Cell + 18" Patina SRP 12
PCPN-00012 14" x 29" x 36" 18" Pink P-Cell + 18" Patina SRP 12

LD45 Plastazote® + LD70 Plastazote®
Item Dimensions Description Case
PLZT-00069 14" x 33" x 29" 18" Pink Plastazote® + 18" White Plastazote® 12
PLZT-00070 12" x 33" x 29" 14" Pink Plastazote® + 14" White Plastazote® 6
PLZT-00071 18" x 33" x 29" 116" Pink Plastazote + 116" White Plastazote® 24
PLZT-00202 18" x 33" x 29" 116" Red Plastazote® + 116" White Plastazote® 24
PLZT-00204 14" x 33" x 29" 18" Red Plastazote® + 18" White Plastazote® 12
PLZT-00206 12" x 33" x 29" 14" Red Plastazote® + 14" White Plastazote® 6

P-Cell® + White LD70 Plastazote®
Item Dimensions Description Case
MDUR-00089 14" x 33" x 29" 18" Pink P-Cell + 18" White Plastazote® 12
MDUR-00098 12" x 33" x 29" 14" Pink P-Cell® + 14" White Plastazote 12

Orthacor
Item Dimensions Description Case
SDUR-00016 14" x 27" x 36" 18" Blue Orthacor + 18" White Orthacor 12
Shop Acor Dual-Laminated Materials

Back to top of page

 

Multi-Durometer Laminates


LD45 Plastazote® + Polyurethane + Microcel Puff®
Item Dimensions Description Case
MDUR-00001 516" x 37" x 30" 18" Plastazote® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 10
MDUR-00002 716" x 37" x 30" 18" Plastazote® + 116"; Blue Polyurethane + 14"; Blue Microcel Puff® 7
MDUR-00003 716" x 37" x 30" 14" Plastazote® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 7
MDUR-00058 38" x 37" x 30" 18" Plastazote® + 18" Blue Polyurethane + 18" Blue Microcel Puff® 8

P-Cell® + Polyurethane + Microcel Puff®
Item Dimensions Description Case
MDUR-00083 516" x 37" x 30" 18" Pink P-Cell® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 10
MDUR-00084 716" x 37" x 30" 18" Pink P-Cell® + 116" Blue Polyurethane + 14" Blue Microcel Puff® 7
MDUR-00085 716" x 37" x 30" 14" Pink P-Cel®l + 116" Blue Polyurethane + 18" Blue Microcel Puff® 7
MDUR-00086 38" x 37" x 30" 18" Pink P-Cell® + 18" Blue Polyurethane + 18" Blue Microcel Puff® 8
MDUR-00162 516" x 37" x 30" 18" Black P-Cell® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 10
MDUR-00164 716" x 37" x 30" 18" Black P-Cell® + 116" Blue Polyurethane + 14" Blue Microcel Puff® 7
MDUR-00166 716" x 37" x 30" 14" Black P-Cell® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 7
MDUR-00168 38" x 37" x 30" 18" Black P-Cell® + 18" Blue Polyurethane + 18" Blue Microcel Puff® 8
MDUR-00170 516" x 37" x 30" 18" Blue P-Cell® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 10
MDUR-00172 716" x 37" x 30" 18" Blue P-Cell® + 116" Blue Polyurethane + 14" Blue Microcel Puff® 7
MDUR-00174 716" x 37" x 30" 14" Blue P-Cell® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 7
MDUR-00176 38" x 37" x 30" 18" Blue P-Cell® + 18" Blue Polyurethane + 18" Blue Microcel Puff® 8

LD45 Plastazote® + SRP + Microcel Puff®
Item Dimensions Description Case
MDUR-00008 38" x 36" x 30" 18" Pink Plastazote® + 18" Patina SRP + 18" Blue Microcel Puff® 8

P-Cell® + SRP + Microcel Puff®
Item Dimensions Description Case
MDUR-00082 38" x 36" x 30" 18" Pink P-Cell® + 18" Patina SRP + 18" Blue Microcel Puff® 8

Microcel Puff® + FM + Microcel Puff®
Item Dimensions Description Case
MDUR-00006 38" x 36" x 20" 18" Blue Microcel Puff® + 18" Black FM + 18" Blue Microcel Puff® 8

TRILAM®: Microcel Puff® + Polyurethane + Microcel Puff®
Item Dimensions Description Case
TRLM-00001 14" x 37" x 30" 116" Pink Microcel Puff® + 116" Blue Polyurethane + 18" Pink Microcel Puff® 12
TRLM-00007 14" x 37" x 30" 116" BBA Microcel Puff® + 116"; Blue Polyurethane + 18"; BBA Microcel Puff® 12
TRLM-00003 14" x 37" x 30" 116" Blue Microcel Puff® + 116" Blue Polyurethane + 18" Blue Microcel Puff® 12
TRLM-00005 14" x 37" x 30" 116" White Microcel Puff® + 116" Blue Polyurethane + 18" White Microcel Puff® 12

TRILAM®: Microcel Puff® + SRP + Microcel Puff®
Item Dimensions Description Case
TRLM-00009 14" x 37" x 30" 116" Pink Microcel Puff® + 116" Patina SRP + 18" Pink Microcel Puff® 12
Shop Acor Multi-Laminated Materials

Back to top of page

 
 

Shoe Repair Supplies

Acor shoe repair supplies

Acor is now carrying products for Shoe Repair

In addition to Outsole Materials we now offer a number of other items to make quality shoe repairs.

This will be an ongoing process of adding top quality products as they become available to us.


Acor outsole materials
Acor Outsole Materials

Acor's Outsole Materials


Acor's outsole materials are superior to crepe, offering greater flexibility, oil resistance and durability. Ideal for use on the soles of shoes, our outsole material can also be used for short limb build-ups, rocker soles and other sole modifications.

Available in three different tread patterns. Sheet Sizes vary.

Ribflex, Sport Wave + Crinkle
Durometer: 55 Shore A (±5)
Compound: Rubber
Thickness: 7mm
Molding Temperature: Not moldable
Grindable: YES
Available Colors: Black, Brown, Beige, White
Sheet Size:
  • 36" x 48" (Ribflex)
  • 36" x 24" (Ribflex)
  • 35" x 21" (Sport Wave)*
  • 35" x 47" (Sport Wave)*
  • 36" x 18" (Crinkle Tread)*
  • 36" x 54" (Crinkle Tread)*

Sport Wave
Dimensions Black Beige Brown White
7mm x 35" x 21" SLHL-10241 SLHL-10504 SLHL-10505 SLHL-10503
7mm x 35" x 47" SLHL-00241 SLHL-00504 SLHL-00505 N/A

Ribflex
Dimensions Black Beige Brown White
7mm x 36" x 48" SLHL-00070 SLHL-00073 SLHL-00072 SLHL-00074
7mm x 36" x 24" SLHL-00079 SLHL-00080 SLHL-00081 SLHL-00082

Crinkle Tread
Dimensions Black Beige Brown White
7mm x 36" x 54" SLHL-00294 SLHL-00293 SLHL-00295 SLHL-00292
7mm x 36" x 18" SLHL-10294 SLHL-10293 SLHL-10295 SLHL-10292
Shop Acor Outsole Materials

Back to top of page

 

Logo for Acor Microcel Puff SBR Outsole Materials
Acor Microcel Puff SBR Outsole Materials
Diamond Pattern EVA/SBR
Durometer: 50/55 Shore A (±5)
Compound: EVA/SBR
Thickness:
  • 12x (1/4")
  • 15x (5/16")
  • 18x (3/8")
  • 21x (7/16")
  • 24x (1/2")
  • 30x (5/8")
  • 36x (3/4")
Available Colors: Black, White, Almond, Brown
Sheet Size: 18" x 36"

Smooth Pattern EVA/SBR
Durometer: 30/35, 50/55 Shore A (±5)
Compound: EVA/SBR
Thickness:
  • 12x (1/4")
  • 15x (5/16")
  • 18x (3/8")
  • 21x (7/16")
  • 24x (1/2")
  • 30x (5/8")
  • 36x (3/4")
  • 48x (1")
Available Colors: Black, White, Almond, Brown
Sheet Size: 18" x 36"

Diamond Pattern 50-55 dur EVA/SBR
Dim Black White Almond Brown
1/4" SLHL-00193 SLHL-00185 SLHL-00272 SLHL-00264
5/16" SLHL-00194 SLHL-00186 SLHL-00273 SLHL-00265
3/8" SLHL-00195 SLHL-00187 SLHL-00274 SLHL-00266
7/16" SLHL-00196 SLHL-00188 SLHL-00275 SLHL-00267
1/2" SLHL-00197 SLHL-00189 SLHL-00276 SLHL-00268
5/8" SLHL-00198 SLHL-00190 SLHL-00277 SLHL-00269
3/4" SLHL-00199 SLHL-00191 SLHL-00278 SLHL-00270

Smooth Pattern 30-35 dur EVA/SBR
Dim Black White Almond Brown
1/8" SLHL-00104 SLHL-00122 SLHL-00312 SLHL-00113
1/4" SLHL-00105 SLHL-00123 SLHL-00311 SLHL-00114
5/16" SLHL-00106 SLHL-00124 SLHL-00315 SLHL-00115
3/8" SLHL-00107 SLHL-00125 SLHL-00314 SLHL-00116
7/16" SLHL-00108 SLHL-00126 SLHL-00317 SLHL-00117
1/2" SLHL-00109 SLHL-00127 SLHL-00310 SLHL-00118
5/8" SLHL-00110 SLHL-00128 SLHL-00316 SLHL-00119
3/4" SLHL-00111 SLHL-00129 SLHL-00313 SLHL-00120
1" SLHL-00281 SLHL-00284 SLHL-00285 SLHL-00282

Smooth Pattern 50-55 dur EVA/SBR
Dim Black White Almond Brown
1/8" SLHL-00143 SLHL-00166 SLHL-00320 SLHL-00151
1/4" SLHL-00142 SLHL-00165 SLHL-00319 SLHL-00150
5/16" SLHL-00146 SLHL-00169 SLHL-00323 SLHL-00154
3/8" SLHL-00145 SLHL-00168 SLHL-00322 SLHL-00154
7/16" SLHL-00148 SLHL-00171 SLHL-00325 SLHL-00155
1/2" SLHL-00141 SLHL-00164 SLHL-00318 SLHL-00149
5/8" SLHL-00147 SLHL-00170 SLHL-00324 SLHL-00172
3/4" SLHL-00144 SLHL-00167 SLHL-00321 SLHL-00152
1" SLHL-00112 SLHL-00130 SLHL-00139 SLHL-00121
Shop Acor Microcel Puff EVA/SBR

Back to top of page

Rubber replacement Heels
what used to be called O'Sullivan's Rubber Heels

Acor Men's Nylon Soft Toplift


O'Sullivan's Heels were the original rubber replacement heels for shoes and have been around for well over 100 years. ACOR is now the sole distributor of the original design.

Available from Acor EXCLUSIVELY!


Color:   Black
Sizes:   13/14, 15/16
Package:   10 pairs
Size 12X (6mm) 15X (7.5mm)
13/14 SLHL-00452 SLHL-00454
15/16 SLHL-00453 SLHL-00455
Shop Acor Men's Nylon Soft Toplift

(You must be logged in with a WHOLESALE account to shop Acor Men's Nylon Soft Toplift)

Acor Toplifting Sheets

Premium Quality Protective Soling


DuraSOLE Protective Soling Rolls


DuraSOLE Toplifting Sheets in 5 colors
DuraSOLE Protective Soling Rolls
Dimensions: 5¼" x 75' rolls
Thickness: 1mm + fabric back
Compound: Polyurethane 90 dur
Available Colors: Black, Tan, White, Brown, Red
Package: 1 roll

Black Tan White Brown Red
SDUR-00046 SDUR-00045 SDUR-00061 SDUR-00049 SDUR-00057
Shop DuraSOLE Protective Soling Rolls

Back to top of page

 

Mini-Check Protective Soling Sheets


Mini-Check Protective Soling Sheets in Black Mini-Check Protective Soling Sheets in White
Mini-Check Protective Soling Sheets
Dimensions: 36" x 36", 36" x 18"
Thickness: 2.4mm
Durometer: 85 dur
Available Colors: Black, White
Package: 1 sheet

 Dim   Black   White 
 36" x 36"   SLHLF-00457   SLHLF-00459 
 36" x 18"   SLHLF-00458   SLHLF-00460 
Shop Mini-Check Protective Soling Sheets

Back to top of page

Acor CPU Heel Tips

Dowel Lifts (Heel Tips)

Liquidating our Inventory!

Call 1-800-237-2267 for a great business opportunity!


CPU Dowel Lifts, otherwise known as heel tips a line drawing comparing the different sizes of Heel Tips

Available sizes:

R10, R13, 9, 10, 11, 12, 13, 13L, 14, 14L, 15, 16, 17, 18, 20L, 23L

3 Pin Diameters Available:

2.5mm(0.098"), 2.9mm(0.115"), 3.04mm(0.12")

Color Black Black Black Oak
Pin 0.120" 0.115" 0.098" 0.120"
R10 SLHL-00358 SLHL-00359 SLHL-00415 SLHL-00431
R13 SLHL-00413 SLHL-00414 SLHL-00416 SLHL-00432
9 SLHL-00352 SLHL-00360 SLHL-00417 SLHL-00433
10 SLHL-00353 SLHL-00361 SLHL-00418 SLHL-00434
11 SLHL-00372 SLHL-00380 SLHL-00419 SLHL-00435
12 SLHL-00354 SLHL-00362 SLHL-00420 SLHL-00436
13 SLHL-00355 SLHL-00363 SLHL-00421 SLHL-00437
13L SLHL-00373 SLHL-00381 SLHL-00422 SLHL-00438
14 SLHL-00366 SLHL-00374 SLHL-00423 SLHL-00439
14L SLHL-00356 SLHL-00364 SLHL-00424 SLHL-00440
15 SLHL-00367 SLHL-00375 SLHL-00425 SLHL-00441
16 SLHL-00368 SLHL-00376 SLHL-00426 SLHL-00442
17 SLHL-00357 SLHL-00365 SLHL-00427 SLHL-00443
18 SLHL-00388 SLHL-00389 SLHL-00428 SLHL-00444
20L SLHL-00407 SLHL-00408 SLHL-00429 SLHL-00445
23L SLHL-00409 SLHL-00410 SLHL-00430 SLHL-00446

Shop Acor CPU Heel Tips
PORON and EVA fillers used for shoe and orthotics repair

Premium Quality Shoe Repair Fillers


PORON® EVA
PORON filler for shoe or orthotic repair EVA filler for shoe or orthotic repair
STRP-00603 STRP-00014
Shop PORON fillers
Shop EVA fillers

(You must be logged in with a WHOLESALE account to shop PORON and EVA fillers)

Rectangular shape is useful for:

  • Sole Fillers
  • Heel Pads - Make 2 from 1 filler!!
  • Metatarsal padding
  • Just about anything! Your imagination is your limit!

Available in ⅛" thickness
Dimensions: 3⅞" x 5⅝"
200 pieces per box
 
 
Acor Orthopaedic, Inc.
18530 South Miles Parkway
Cleveland, Ohio 44128

Toll-Free: 800-237-2267
Toll-Free Fax: 800-830-8445


Email Order Entry: orderentry@acor.com
Email Customer Service: cs@acor.com

© Acor Orthopaedic, Inc.
All Rights Reserved.